-
- Exterior (149)
- Engine Parts & Accessories (385)
- Oils & Oil Filters (34)
- Seats & Accessories (1)
- Exhaust Systems (112)
- Tools (3)
- Electronics (134)
- Carbon Fiber Parts (93)
- Wheel Accessories (144)
- Turbos & Accessories (256)
- Intercooler Kits (73)
- Hose Fittings (75)
- Air Filters & Air Intake Kits (150)
- Gaskets & Seals (89)
- Gear Knobs & Accessories (101)
- Suspension & Handling (288)
- Radiators & Accessories (118)
- Fuel System & Accessories (191)
- Gauges & Accessories (68)
- Momo Steering Wheels (13)
- Short Shifters & Accessories (25)
- Titanium (28)
- Silicone Joiners (151)
- Wheels (26)
- Accessories (128)
- Tyres (98)
- Drivetrain (117)
- Clutch Kits (70)
- Drive Shaft Axles (9)
- Torque Mounts (7)
- Clutch Lines (14)
- Diff Bushing (2)
- Spacers & Collars (5)
- Clutch Pivot Balls (1)
- Coolers (0)
- Engine Mounts (0)
- Brakes & Accessories (289)
- Wheel Bearing Hubs (44)
Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 1 replacement clutch kit offers a strong torque capacity increase.
Each component has been thoroughly tested and developed for a specific application.
This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 65 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, Mantic Clutch a division of Clutch Industries (CI) is the trusted source for a complete range of Clutch Kits suited to your vehicle.
PATENTED Mantic STAGE SERIES COVER ASSEMBLY
Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage cover assemblies are in themselves high clamp load covers providing increased clamping force as compared to standard product. Stage 1 kits also feature the Patented ER2 grooved cover which increase torque capacity while also improving heat dissipation.
SPHEROIDAL GRAPHITE CASTINGS
Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion.
BALANCED COVERS
To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process.
CLUTCH PLATE
250 x 24T x 25.5
TORQUE CAPACITY
Peak: 666Nm, Rated: 533Nm
(MS1-2102-BX-PUSH)
SKU | MS1-2102-BX-PUSH |
Brand | Mantic |
Shipping Weight | 10.0000kg |
Shipping Width | 0.400m |
Shipping Height | 0.300m |
Shipping Length | 0.150m |
Shipping Cubic | 0.018000000m3 |
Be The First To Review This Product!
Help other Shift Performance Parts users shop smarter by writing reviews for products you have purchased.